Audi Service · 310S Licensed · Independent · GTA

Audi service,
coded to the spec Ingolstadt publishes.

Out-of-warranty Audi owners across the GTA come to MFP for B8 / B9 A4 and Q5 scheduled-service intervals held to OEM, C7 / C8 A6 air-suspension and MMI / MIB electronics, the notorious Mechatron-tronic and DSG adaptation on TDI / TSI quattro drivelines, and the Q7 rear Torsen differential plus the 3.0T supercharged V6 (EA837) timing-chain stretch read. Diagnosed on the Autel Ultra VAG-native tooling and lined up on the Hunter HawkEye Elite for road-force alignment against Audi’s tighter front/rear tolerance window. A3, A4, A5, A6, A7, and A8 sedans and Sportbacks. Q3, Q5, Q7, and Q8 SUVs. RS and S-line owner cars — and e-tron with high-voltage isolated procedures on the electrified side of the lineup.

Request an Audi quoteFull services overviewWhat we work on
Diagnostics
Autel Ultra
Alignment
Hunter HawkEye Elite
Parts
OEM-certified only
Technicians
310S licensed

Audi-specific capability

Coding, alignment, OEM mechanical — executed weekly.

Each card below names the work we run against Audi platforms at the MFP bays. Every procedure is paired with a photo-documented dossier on the way out.

Capability 01 · B8/B9 A4 + Q5 scheduled service

B8/B9 A4 + Q5 service intervals, held to OEM
B8 and B9 A4 and Q5 service intervals held to factory — brake fluid moisture test, DSG Mechatron fluid and filter, intake carbon service, BEM long-coding after control-unit replacement, and battery registration on 2017+ AGM platforms with BMS reset. Scanned end-to-end on the Autel Ultra before and after the work so the chassis warning does not return on the way out.
B8 / B9 A4 + Q5 long-form scheduled service to OEM interval
Brake fluid moisture test, DOT 5.1 flush with EPB service mode
DSG Mechatron fluid + filter on the 7-speed S-tronic
Intake carbon service and battery registration (2017+ AGM BEM reset)

Capability 02 · C7/C8 A6 chassis + MMI

C7/C8 A6 air suspension and MMI / MIB module coding
Air strut replacement, compressor and valve-block work, ride-height sensor reset, and MMI / MIB module adaptation — J794, J949, J533, and the driver-assistance module — after windshield replacement or camera offset. Done against OEM torque, with the comfort-and-convenience feature set long-coded so the chassis warning does not return.
Air strut, compressor, and valve-block replacement with ride-height reset
MMI ride-height display recalibration post strut work
MIB2 / MIB3 (J794, J949) module coding after control-unit replacement
Driver-assistance module coding after windshield or front-end repair

Capability 03 · Mechatron, DSG, timing chain, Q7 diff

Mechatron-tronic, DSG, timing-chain wear, Q7 rear diff
The mechanical line underneath the VAG electronics. 7-speed S-tronic (DSG) Mechatron-tronic adaptation after fluid service. 8-speed ZF automatic fluid and Mechatron on TDI / TSI quattro drivelines. Borescope timing-chain stretch read on the 3.0T supercharged V6 (EA837) and the 2.0T EA888 Gen3, image-documented. Q7 rear Torsen differential fluid service at OEM interval, with crown backlash measured and photo-documented pre / post on the Hunter HawkEye Elite.
7-speed DSG Mechatron-tronic fluid + filter with clutch pressure adaptation
8-speed ZF automatic fluid + Mechatron on TDI / TSI quattro
Q7 rear Torsen differential service at OEM interval with backlash measured
3.0T supercharged V6 (EA837) timing-chain stretch read, borescope + live data

Procedures on the lift weekly

Audi work we are turning this week.

A short list of platform-specific procedures running across the Richmond Hill and Burlington bays. If your Audi needs any of these, the quote form below prefills to Diagnostic so the front desk has the right context first time.

B8/B9 A4 + Q5 scheduled service (long-form)Brake fluid moisture test, DSG Mechatron fluid + filter, intake carbon service, and battery registration with BEM reset on 2017+ AGM platforms.
Mechatron-tronic fluid + adaptation (7-speed DSG / 8-speed ZF)Oil and filter service with clutch pressure adaptation, executed on the live data stream against OEM torque and seal sequence.
C7/C8 A6 air suspension workStrut, compressor, valve block, with ride-height sensor reset and MMI ride-height display recalibration.
MIB2/MIB3 / MMI module coding after replacementJ794, J949, J533, and driver-assistance module coding after windshield replacement or front-end repair.
Q7 rear Torsen differential serviceFluid at OEM interval, crown backlash measurement, photo-documented before/after on the work order.
3.0T supercharged V6 (EA837) timing-chain stretch readBorescope + live-data correlation, image-documented in the work order — read on the bench, not guessed from the dashboard.
Quattro alignment, road-force verifiedHunter HawkEye Elite readout against Audi front/rear tolerance window, with pre/post printout kept on the customer file.
Battery registration (2017+ AGM with BEM reset)BMS reset and CAN-bus profile reset on B8/B9 A4 + Q5 and Q7/Q8 platform vehicles — coded afterward so the start-stop function comes back online.

Proof points

What the MFP Standard looks like, in writing.

The four MFP Standard pillars — alignment, diagnostics, mechanical, and seasonal storage — translate on an Audi to the items below. These are the credentials and capabilities an out-of-warranty Audi owner should be able to verify before booking.

  • Ontario 310S-licensed master techniciansMaster-tech certification across the front desk and the bay — same credential the dealer groups are required to staff.
  • OEM-certified Audi-catalogue partsEvery part installed on your Audi carries an Audi-catalogue part number — no aftermarket substitutes, no catalogue drift.
  • Road-force verified alignmentHunter HawkEye Elite readout on every alignment, with the pre/post printout kept on the customer file alongside the work order.

Independent, not aftermarket

Why independent beats the dealer for an Audi.

Once an Audi is out of factory warranty, the dealer's value proposition shifts from coverage to upsell. The MFP bays keep what is worth keeping — OEM parts, master technicians, dealer-grade tooling — and drop the markup and the advisor-driven sale.

Out of warranty? No more upsell.

Dealer visits drift toward extended-warranty pitches once the factory coverage ends. We write a transparent estimate against Audi-catalogue part numbers, and only the work you approved gets done.

OEM parts at Audi-catalogue part-number pricing.

Every part installed on your Audi carries a manufacturer part number sourced against the Audi catalog — no aftermarket substitutes, no markup on the same item the dealer would fit at the same number.

Audi specialist, not a general-line advisor.

Our technicians tune VAG modules weekly — SCN pairing, BEM long-coding, magnetic-ride adaptation — and read Hunter HawkEye Elite alignments against Audi's tighter front/rear window. The same equipment and the same diagnostic workflow the dealer groups run, without the dealer pricing.

Book service · Audi

Bring your Audi to the standard.

The intake form below carries your year, model, and symptom straight to the front desk with the right context — we reply with a written estimate against Audi-catalogue part numbers before any work starts.

Email the shop —
Richmond Hill · Burlington
Or use the online booking form →

Booking intake

Tell us how we can help.

Requested service: Audi Service

We typically reply within 1 business day.

Adjacent offer

Climate-controlled seasonal storage, across the MFP bays.

Air-cooled classics, low-mileage GT cars, Taycans and GX SUVs waiting out the season — humidity-managed, tendered, and walked to running on retrieval. Richmond Hill + Burlington.

Battery-tender on every car · Two-shop coverage · MFP four-step protocol
Adjacent offer
Read the seasonal-storage offer

Adjacent offer

Road-force verified alignment, dealer-grade across the MFP bays.

The four-camera Hunter HawkEye Elite rig and road-force verification on the same visit — written before/after printout, BMW / Mercedes / Audi / Porsche / Lexus / Tesla-friendly. Richmond Hill + Burlington.

HawkEye Elite · Road-force verified · 310S-licensed master
Adjacent offer
Read the road-force alignment offer

Explore the full-lineup luxury shop

Explore our other marques.

The full MFP lineup — every brand we service at the Richmond Hill and Burlington bays, against the same four-step protocol.

MFP Mobile Service · Independent luxury auto service · Ontario 310S licensed
Audi service · Richmond Hill · Burlington · GTA